New Amiga 2000 CPU Slot Adapters!

The new design is done and the boards are in! This time they are in brilliant black and gold! Prices remain the same for these. They are $35 shipped worldwide when paying with PayPal. For those that do not know what they do, they allow you to relocate a device normally used in a 68000 CPU socket to the A2000 CPU slot for easier access and convenience. They work great with the Vampire 500 and the Terrible Fire accelerators as an example.

29365694_10156318797704954_2819672224829538304_n

29432728_10156319123539954_766186203845230592_n

29365613_10156318797679954_5205389634200141824_n

13 thoughts on “New Amiga 2000 CPU Slot Adapters!”

I’m interested to buy one of these adapters to use the Vampire 500 v2+ on my A2000 6.2

LikeLike

Reply ↓

Acill on January 3, 2019 at 11:21 am said:

No problem. Just send me a message through the contact page and I will let you know how to get once made and sent out.

LikeLike

Reply ↓

hallo
i am interested on buying a cpu slot adapter for a2000 REV 6 to use with a vampire 500v2+

LikeLike

Reply ↓

Acill on April 5, 2019 at 8:11 am said:

Sure, just send me an email using the contact tool here and I will let you know how to get it paid for. They are $35 shipped anyplace in the world now.

LikeLike

Reply ↓

Hi,

Do you have female connector so, please ?
Thank’s a lot.

LikeLike

Reply ↓

Acill on August 16, 2019 at 8:15 pm said:

No I dont, but Mouser.com has them in stock.

LikeLike

Reply ↓

Hi Acill,
thanks for the good work. Are there known issues with a Rev 4.4 board, your connector and a vampire? It works with the M68000 but produces a yellow screen with the vampire. The vampire works in the CPU socket.
Regards Ali

LikeLike

Reply ↓

Acill on October 26, 2019 at 8:54 am said:

This is the first I have heard of it. Have you pulled out the 68000 and the KS ROM? Maybe that is the issue? I can see if I have a working 4.4 and try as well.

LikeLike

Reply ↓
- Ali on October 26, 2019 at 11:52 am said:
  
  Hi,
  yes, both ROM and 68k were pulled out. I also checked the connection between CPU connector and CPU slot or Custom Chip. All fine. Either busted chipset or incompatible mainboard. If you could try, would be great.
  THX.
  
  LikeLike

Hello, do you think it is possible to reverse-use it in an Amiga 1000, to have a Zorro compatible slot inside the case pinned in the processor clot of the amiga 1000 ?

LikeLike

Reply ↓